Lou's Short Stick - Camaro / Firebird (1993-2002)
We are proud to announce that we are the exclusive reseller of the one and only original "Lou's Short Stick". Don't be fooled by imitations. Lou's Short Stick is available for the following:
Stock, Factory Hurst , SLLP Short Throw and Pro 5.0 shifters.
Features:
* Constructed of high strength steel.
* Retains the factory boot and knob.
* One piece design with no welds to break
Part #52501-BLK - Short Stick for the Stock. Factory Installed Hurst & SLP Short Throw (6 speed) The Short Stick for the stock, factory-installed Hurst shifter and SLP shifter reduces shifter throw by 20%. One model Short Stick is compatible with all three shifters. The rubber grommet is deleted on the handle for these shifters which eliminates the "spongy" feel of the shifters and allows for shorter, quicker and more positive shifting.
Part #52502A-BLK - Short Stick for the Pro 5.0 Shifter The Short Stick for the Pro 5.0 shifter reduces shifter throw by 17%. It has a bend toward the driver (left) of approximately 25 degrees and a bend toward the rear of approximately 5 degrees. It also shortens the handle considerably for better knob position. It is available to accept the stock knob.
Stock, Factory Hurst , SLLP Short Throw and Pro 5.0 shifters.
Features:
* Constructed of high strength steel.
* Retains the factory boot and knob.
* One piece design with no welds to break
Part #52501-BLK - Short Stick for the Stock. Factory Installed Hurst & SLP Short Throw (6 speed) The Short Stick for the stock, factory-installed Hurst shifter and SLP shifter reduces shifter throw by 20%. One model Short Stick is compatible with all three shifters. The rubber grommet is deleted on the handle for these shifters which eliminates the "spongy" feel of the shifters and allows for shorter, quicker and more positive shifting.
Part #52502A-BLK - Short Stick for the Pro 5.0 Shifter The Short Stick for the Pro 5.0 shifter reduces shifter throw by 17%. It has a bend toward the driver (left) of approximately 25 degrees and a bend toward the rear of approximately 5 degrees. It also shortens the handle considerably for better knob position. It is available to accept the stock knob.
