|These fuel rail covers come standard on late model Corvettes and have been adapted for use on the 1998-2002 Camaro and Firebird V8 LS1 models. We start with a Corvette OEM cover and make the necessary cuts to fit the Camaros and Firebirds. These cuts take into account the 2 fuel lines and the air system. Covers can be installed as is.|
We also provide you with options to purchase vinyl lettering to customize your covers if you decide to fill in the "Corvette" indent and paint them yourself. If you would like to have us fill in the "Corvette" indent for you, there is an option for that as well. Then all you need to do is paint and customize.
The vinyl lettering is made of 5 year vinyl and is precisely cut by computer. If you would like the 5.7L/stripe area to stand out more you can select a vinyl overlay color.
If you have any special requests for extra vinyl use the field below and we'll get back with you on the extra cost and details. For example, if you want your car # on a second line we can do that for an extra vinyl charge.
*** Covers will not fit under SLP strut tower braces. BMR and Hotchkis are not a problem. *****
Includes suggestions for finishing covers, instructions on vinyl application, and installation.
** Note - It is recommended that you install some heat reflective tape under painted covers, especially if you have headers. We can supply it with your order or you may be able to pick up some locally. One roll is enough for general coverage. If you want full coverage underneath and extra to retape your fuel lines you may want 2 rolls.***
See sample pictures below of what you can accomplish with these DIY kits. All you will need is some primer, paint, clear coat and time.
** WE ARE TAKING A BREAK ON PAINTED COVERS. GM DISCONTINUED THE DRIVER'S SIDE FOR THE 97-98 CORVETTE. IF YOU FIND A SET YOU CAN SEND THEM TO US**