Race Ramps Wheel Stands - 14 Inch
  Wheel Stands offer you a 16 inch square working platform to accommodate scales a turntable, or to be used as a display block. They are lightweight (12 pounds per stand), yet sturdy and stable. Their textured surface prevents slipping and they won't scratch or dent your car or floor.
Race Ramps Wheel Stands were created as a replacement for heavy metal wheel alignment stands or Monkey Grease Plate Stands. The concept is clear, the Slip Plate Stand is used usually with a 2 or 4 post lift system. The vehicle is raised on the lift; the Wheel Stands are positioned under each tire with a turntable on top of each stand. Then the vehicle is lowered onto the stands ready for alignment. Typically alignment turntables are used atop most alignment stands.
Race Ramps Wheel Stands are very light and strong. The base is 18 Inches by 18 inches; they have a huge and stable footprint. Using their Patented Race Ramps Technology, these stands are 100% solid core with zero cavities. Every race Ramps products carries this quality, as well.
The horizontal surface is reinforced to ensure your new Wheel Stands will last for many years of commercial use. The beauty of the Wheel Stands, is that you can use them for other applications, such as Car Show display. They are unmarking and will not scratch an epoxy coated garage floor. They also incorporate our "No-slip" Race Ramps technology, They simply do not budge.
Sold as a pair (2)
|
|
