BMR Camaro / Firebird Subframe Connectors (1993-2002)
  Reduce chassis flex to a minimum and increase your handling capabilities with a set of BMR subframe connectors. These weld-in subframe connectors fit 1993-2002 F-bodies and will work with all aftermarket exhaust systems. All mounting plates are made from either 3/16" or 1/4" laser cut plates for the ultimate in strength. Boxed connectors (picture below) use 2" square tubing while tubular connectors (shown above) use 1-5/8" roll cage tubing.
Which design to pick? Here are some tips from BMR: While you can't go wrong with either design, use the following to determine your order: If strength is your number one priority, choose the boxed design. Boxed tubing is torsionally stronger than round tubing however you will lose approximately 3/4" of ground clearance when using this style. If your car is lowered and ground clearance is the prime concern, go with the tubular model. While round tubing is not as strong torsionally, there are other features to these subframe connectors that make them more rigid than most other tubular models available. Available in Black Hammertone or special order red powdercoat.
|
 |  Convertible LS1 PictureEnjoy the same features as the above when using BMR's convertible subframe connectors. While GM attempted to reinforce the convertibles floorpan with formed sheetmetal, nothing increases chassis rigidity like a pair of subframe connectors. Constructed with 1-5/8" rollcage tubing and laser cut, 1/4" weld plates, these subframe connectors will change the "feel" of your convertible.
| | |  Boxed Subframe Connectors for Hardtop Picture
| | |  Black Hammertone Color
| |
|
|
