BMR Camaro V8 Lowering Springs (2010 & Up)
  BMR's 2010 & up Camaro V8 lowering springs are specifically designed to provide optimal handling without sacrificing ride quality. Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability. BMR's extensive development time produced the optimal rates for this application. By using a 220 lb/in front spring and a 460 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics.
BMR's 2010 & up Camaro V8 springs are cold wound from high-tensile chrome silicon wire, stress relieved, compressed for permanent set then shot peened and computer tested. Some of these procedures are overkill but it ensures a long, trouble-free life with consistent rates and ride heights. Because of these features, BMR is able to offer a lifetime warranty against spring sag.
|
 |  BMR Camaro V8 Lowering Spring Kit 1.0" Drop (2010 & Up)
| |  BMR Camaro V8 Front Lowering Springs 1.0" Drop, 220 Spring Rate (2010 & Up)
| |  BMR Camaro V8 Rear Lowering Springs 1.0" Drop, 460 Spring Rate (2010 & Up)
| | |  BMR Camaro V8 Lowering Spring Kit 1.4" Drop (2010 & Up)
| |  BMR Camaro V8 Front Lowering Springs 1.40" Drop, 220 Spring Rate (2010 & Up)
| |  BMR Camaro V8 Rear Lowering Springs 1.4" Drop, 460 Spring Rate (2010 & Up)
| | |  BMR Camaro V8 Lowering Spring Kit 1.4"Front & 1"Rear Drop (2010 & Up)
| |
|
|
